Strictly follow the computer program to operate and start the operation, turn on the main heating power supply (one, two, three, and four zone heating switches) respectively, and keep the continuous heating time for 6 hours. Saw Hob Vacuum Furnace Application That is: 1 hour at 150 degrees, 1 hour at 300 degrees, 1 hour at 450 degrees, 1 hour at 550 degrees, half an hour at 700 degrees, half an hour at 800 degrees, half an hour at 50 degrees per liter above 800 degrees.Flux-free Vacuum Brazing of Aluminum Alloys When the furnace temperature of the quenching furnace reaches above 200 degrees, the cooling water at the furnace mouth should be turned on (considering water saving, as long as there is a small amount of flow, the outlet water is 70 degrees).Ceramic-To-Metal Vacuum Brazing Services When the temperature of the quenching furnace reaches above 300 degrees, the mesh belt should be turned on. When the furnace temperature of the quenching furnace reaches 500 degrees, the water circulation pump is turned on to keep the water curtain cooling in the water seal groove at the outlet of the furnace.Vacuum oil quenching and tempering spring steel wire
Strictly follow the computer program to operate and start the operation, turn on the main heating power supply (one, two, three, and four zone heating switches) respectively, and keep the continuous heating time for 6 hours. Saw Hob Vacuum Furnace Application That is: 1 hour at 150 degrees, 1 hour at 300 degrees, 1 hour at 450 degrees, 1 hour at 550 degrees, half an hour at 700 degrees, half an hour at 800 degrees, half an hour at 50 degrees per liter above 800 degrees.Flux-free Vacuum Brazing of Aluminum Alloys When the furnace temperature of the quenching furnace reaches above 200 degrees, the cooling water at the furnace mouth should be turned on (considering water saving, as long as there is a small amount of flow, the outlet water is 70 degrees).Ceramic-To-Metal Vacuum Brazing Services When the temperature of the quenching furnace reaches above 300 degrees, the mesh belt should be turned on. When the furnace temperature of the quenching furnace reaches 500 degrees, the water circulation pump is turned on to keep the water curtain cooling in the water seal groove at the outlet of the furnace.Vacuum oil quenching and tempering spring steel wire